Shop On Line or Click and Collect service now operating. Click here to see our Covid Safe Guidelines. Read more

Shop Online

Turf Wicket 9.5mm Cricket Grass

Turf Wicket 9.5mm Cricket Grass

NEW TO RANGE – Supergrasse Turf Wicket!

Turf Wicket is a 2/tone sandy coloured 9.5mm synthetic grass suitable for centre pitches and training wickets.   The perfect pitch to mimic the fast pace Australian natural turf pitches of the WACA and the GABBA.


Turf Wicket colour matches a natural turf pitch utilising a dual tone yarn for a realistic appearance.  The softer fibre composition  of Turf Wickets plays faster with a higher bounce. Turf Wicket exclusive yarn is made  100% Australian Made.


Our synthetic grass cricket wickets are available in widths of 1.85mts, 2.8mts, and 3.7m and in varying lengths to suit your wicket requirements.




Pile Height:


Product Weight:


Stitch Rate:

29 per 100mm


Roll width sizes are 3.7m, 2.8m, 1.85m




Approximately 20L every 30m2


8 years

AUD $41.00

This product comes with an 8 year manufacturer’s warranty protecting the consumer’s product against UV protection failure, manufacturer’s workmanship, primary and secondary backing failure, unreasonable product deterioration under normal usage circumstances. The warranty does not cover misuses, negligence, incorrect installation methods or use of non-specified chemicals on the surface.

This product is made with a heavy metal free yarn which is protected against UV degradation and light fastness to meet the highest standards.

Industry Standard Roll Widths are 3.71 mts wide and sold by the lineal metre.

If the area you intend to cover is wider than 3.71 mts, then you will need to join the grass.

Remember, two or more rolls laid side by side MUST be laid in the same pile direction – and this will determine how much grass you need. This will generally be more than the m2 of the area as there will be wastage. Draw a diagram of the area to be covered (preferable to scale) and the quantity of grass can be easily calculated

Assume you are covering an area of 7mts wide x 8mts long = 56m2

Determining Idealgrass linear meters.

Divide the total width of the area by 3.71mts to give you the number of runs. Example: 7mts ÷ 3.7 = 1.9 runs (round up to 2 runs of 3.7mts).

Take the length of your area and multiply the number of runs.  Eg: 8mts x 2 runs = 16 lin.mts. (x 3.7m = 58.56m2)

Determining Infill Material

Check manufacturer guidelines.  EG; for Pro Lawn 25mm manufacturer recommends 10 kgs/psm of Silica Sand (kilm dried) per m2,Example: 56m2 x 10 = 560 kg of sand/25kg bags of sand = 27 bags.


Determining Base Material

Take the total m2 of the area to be prepared and multiply by depth of base material (in this instance 100mm = .1) Example: 56m2 x .1 = 5.6 cubic mts. of base material.

80% of the total amount of base should be 20mm grade 3 rock.  Spread, level set for optimum flow to drainage point, screed, lightly compacted.  

Then 10-20% of the base should 5mm FCR (fine crushed rock), spread, screed and heavily compacted, wet down.  The end result should look like freshly poured concrete.  No pertruding stones!!